BMW 6WB MFID Instrument Cluster Retrofit Coding

You are here:
Estimated reading time: 1 min

This article rewrite the post from bimmerfest forum by member
shawnsheridan,big thank for his contribution.And this article about how to
coding for BMW 6WB MFID instrument cluster retrofit coding.

BMW 6WB MFID Instrument Cluster Retrofit And Coding
Summary:
Since mine was a brand new virgin Kombi, no EEPROM work was necessary to
blank the donor car°Øs mileage and VIN. Install was a breeze, and Coding was
just a matter of adding 6WB to the VO, changing VO Production date to 1211,
and VO Coding DKombi and HU_CIC.Since my car does not have ECO Pro, I get
just the Comfort and Sport mode displays.

BMW E-sys Coding Software Free Download
BMW Coding/Flashing/Progrmming

Procedures:
1) Connect E-Sys and Read FA from car at the Coding Function in Expert
mode.
2) Save FA and Edit FA
3) Add 6WB to SALAPA and calculate FP with no error.
4) Save FA
5) Select Expert mode, VCM function and select FA.xml file at the Vehcle
Order.
6) Select the VCM Master tab and click the Write FA FP button.
7) Select Coding function and read FA and Activate FA and Read SVT.

You need to try and inject CAFD into Kombi ECU
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM)
=> Left-Click on DKombi => Click on °∞Detect CAF for SWE°± => Select
the CAFD from latest I-Level => Select OK => Right-Click on DKombi (the
ECU itself not the underlying CAFD) => Select CODE.

If you use a used one
Then you need to first also blank VIN and Mileage in EEPROM with an EEPROM
Programmer, and then Flash Kombi to write car VIN to it.

Was this article helpful?
Dislike 0
Views: 3
Previous: How to Update BMW NCS Expert Software
Next: BMW ITool Radar Free Download and Installation