BMW E90 iDrive Legal Disclaimer Disable by NCS Expert

You are here:
Estimated reading time: 2 min

BMW E90 iDrive Legal Disclaimer Disable Procedures:
Run the INPA software,once NCS is open Choose File from the top menu

BMW E90 iDrive Legal Disclaimer Disable (1)
Select Load Profil
BMW E90 iDrive Legal Disclaimer Disable (2)
Choose Fister profile if you have obtained it or new_expertmode / car/key
memory.
BMW E90 iDrive Legal Disclaimer Disable (3)
Then Press F1 or choose VIN/ZCS/FA
BMW E90 iDrive Legal Disclaimer Disable (4)
Now press F3 or choose ZCS/FA f. Ecu
BMW E90 iDrive Legal Disclaimer Disable (5)
Select the model car, In this case E89 which is for the E90
BMW E90 iDrive Legal Disclaimer Disable (6)
Chose the Module in which to read the ZCS/FA, In this case we chose
CAS.
BMW E90 iDrive Legal Disclaimer Disable (7)
Upon seeing the above screen with the FG and FA Values displayed simply hit
F6 or Back.
BMW E90 iDrive Legal Disclaimer Disable (8)
You will now get a list of installed modules that were identified when
communication with the chosen module as before.Choose Process ECU to work
with a single module.
BMW E90 iDrive Legal Disclaimer Disable (9)
Select the Module/ECU you would like to work with, In this case the CAPPL.
(CCC Unit)
BMW E90 iDrive Legal Disclaimer Disable (10)
Press OK on the following screen.
BMW E90 iDrive Legal Disclaimer Disable (11)
Now you can choose READ ECU to perform a read out of the module.
BMW E90 iDrive Legal Disclaimer Disable (12)
You will get a NETTODAT.TRC file popup simply close it.
BMW E90 iDrive Legal Disclaimer Disable (12)
Navigate to the Work folder which resides in your NCSEXPER directory. You
will locate a file FSW_PSW.TRC
This file was created when READ ECU was performed and contains the coding
values for that module.
Rememeber this file is overwritten each time a readout of a module is
performed. It would be advised to make a backup of this file in the event you
need to restore coding settings.
Once you have made a backup, Right click and rename the file to
FSW_PSW.MAN
BMW E90 iDrive Legal Disclaimer Disable (14)
Yes to make the change.
BMW E90 iDrive Legal Disclaimer Disable (15)
Now right click and choose Open With°≠
BMW E90 iDrive Legal Disclaimer Disable (16)
Select Notepad and tick Always use the selected program to open this kind
of file. Then Press OK.
BMW E90 iDrive Legal Disclaimer Disable (17)
Now we can make changes to the coding file. In this case we are changing
LEGAL_DISCL
BMW E90 iDrive Legal Disclaimer Disable (18)
As you can see from the screen above we have changed this to nicht_aktiv which
will now disable the Idrive warning.
BMW E90 iDrive Legal Disclaimer Disable (19)
Choose file and click save.
BMW E90 iDrive Legal Disclaimer Disable (20)
Now switch back to NCSExper and choose file and click Load Profil
BMW E90 iDrive Legal Disclaimer Disable (21)
Choose the Manual PSW_FSW and hit ok.
BMW E90 iDrive Legal Disclaimer Disable (22)
Now press Process ECU so we can tell NCSExper what module we would like to
code to.
BMW E90 iDrive Legal Disclaimer Disable (23)
Choose the CAPPL modules and press ok.
BMW E90 iDrive Legal Disclaimer Disable (24)
Press Ok.

BMW E90 iDrive Legal Disclaimer Disable (25)
Now we are ready to code the PSW_FSW.man to our CAPPL (CCC) unit. Make sure
the JOBNAME is set to SG_CODIEREN.If it is not simply choose Job and choose
SG_CODIEREN. Make sure the get coded: is CAPPL (Or the unit you will be
working with)
Hit Execute Job to perform coding.
Underneath CAPPL a status will appear intially saying CODING ACTIV and then
CODING ENDED.

Once this is disabled you may power off the car wait 10 seconds and repower
up to identify whether your coding changes have taken.

Was this article helpful?
Dislike 0
Views: 11
Previous: BMW HU_CIC/KOMBI/CMB_MEDIA/ZGW Coding Guide
Next: How to Update BMW NCS Expert Software