BMW VO code coding programming

You are here:
Estimated reading time: < 1 min

BMW Esys Coding Programming BMW VO Car Configuration Codes

BMW E-sys change vo code

How to program with BMW E-sys

  1. Connect to BMW car;
  2. Read FA,read ecu and Calculate ecu version.(Calculate will take 10 minutes)
  3. Select SVT (calculated)
  4. Select the ecu to be programmed, check the program file, and click Start to program;(will take 10 minutes or more)
  5. Program finished;
  6. After programming ecu, you still need to ecu code;
  7. Code finished,ecu programming complete.
  8. (Tips :If the ecu still does not work, you need to use the BMW ISTA diagnostic software to check the fault and check whether the ecu needs to be matched or learned.)
Was this article helpful?
Dislike 0
Views: 11
Previous: How to install BMW ACC 5AU by using SmartBimmer coding myself?