Can’t use my JLR DOIP work with JET Master/SX-tool

You are here:
Estimated reading time: < 1 min

Yes, you can.

The JLR DoIP original VCI will work perfectly with the JLR Engineering Tool.

  1. Be sure your JLR Pathfinder or JLR TOPIx is communicating between the car and the computer.

2. Run JET Software with the JLR DOIP interface To communicate with the car, you must have Pathfinder software or the JLR TOPIx is communicating with the JLR DOIP at the same time, then simultaneously use our jet master/pro to work with the car.

3. More options You can also use the JLR Enet adapter to work with all JET tools with a very cost effective way.

Apply for JLR Remote Support

JLR Remote Support
Before Starting:
Notes: Please ensure that you have all of the OEM tools and system available for all dealer-based online coding programming jobs; for programming flashing updates, original dealer VCI is a MUST, also a good stable power supply is always recommended, especially for Porsche, Mercedes, and JLR online ECU programming, for Taycan campaign updates, PIWIS IV the latest is recommended. (Car diagnostic tools involved: BMW ICOM Next a or BMW Esys EsysPlus4.2 or ISTA BMW, Mercedes Xentry Diagnosis with VCI C6 original, Audi ODIS with Geko, Porsche PIWIS 4 with PPN login, Land rover JLR Pathfinder with JLR DOIP, JET Master/SX-Tool)
Tags:
Was this article helpful?
Dislike 0
Views: 68
Previous: (Issue) Sorry, there’s no license keys available
Next: Running JET Master in multiple laptop or VMWare possible?