Change BMW E60 Vehicle Order with NCS Expert (VO)

You are here:
Estimated reading time: 1 min

you coding for bmw OEM features that was not originally programmed at the
factory to include an alarm, such as OEM alarm, require you to add codes to
the Vehicle Order (VO) also known as the FA.
You need to change VO, so here I share guide on:

How to Use NCS Expert to change BMW Vehicle

Coding Tools you need

  • BMW INPA OBD2 Cable.
  • NCS Expert Software.(Special for BMW E-series,F-series use BMW
    Esys BMW and
  • Laptop
  • BMW

    How to use NCS Expert to change BMW Vehicle Order

  • Step 1:Open NCS Expert Coding Software on your laptop,click
    “File” then click”Load Profile”
  • Step 2:Select “Expert Mode” ==>click “OK”
    ,then press F2 “Chassis”
  • Step 3: Select “Vehicle Type”==>Click
    “OK”,then press F6 “Back”.
  • Step 4:Press F1″VIN/ZCS/FA”,then press F2 “Enter
  • Step 5:Click “OK”==>Check the  VIN is correct and Click
  • Step 6:Enter desired option eg.$880,then click
    “Add”===>Click “OK”.
  • Step 7:To delete an option highlight the desired option then
    press “delete button on keyboard”,then click
  • Step 8:Press F6 “Back”,then press F4″Process ECU
  • Step 9:Press F2 “Change Job”,then select
    “FA_Write” and click “OK”
  • Finally,press F3 “Execute Job”,and click “X”
    close to end program.Coding complete “Ended”.
  • Note:Only the CAS has the new vehicle order,the second control unit which
    stores the vehicle order must now be coded with the new vehicle order,select
    F1 “Change ECU” and repeat process.

    Was this article helpful?
    Dislike 0
    Views: 17
    Previous: Guide for BMW E Series CIC Retrofit Coding
    Next: BMW NCSEXPER coding, BMW E66 how to use NCSEXPER coding