FSC Code Solution for BMW E and F Series CIC

You are here:
Estimated reading time: 2 min

FSC
Code Solution for BMW E and F Series CIC Preparations

BMW Esys BMW and
EsysPlus

BMW FS-Tool Freischalt tool

How to install Head Unit patch

1.Copy provided copie_scr.sh file into any available USB flash memory stick
with FAT32 file system. Recommended flash drive capacity is 2 or 4 or 8
GB.
2.Turn ignition on or better start engine.
3.Wait at least 60 seconds for full system boot and then connect the USB
flash drive.
4.After 5-10sec iDrive system will reboot
5.Disconnect USB flash drive and wait at least 60 seconds for full system
boot.

How to import custom FSC codes in E series CIC

1.Configure EDIABAS for D-CAN or K-line protocol, perform CIC coding using
NCS-Expert tool with correct car FA and original VIN.
2.Unpack provided archive with FSC codes.
3.Start FS-Tool2 and establish connection.
4.Open “Configuration” tab, press “Search” button for
“Sig Certificate” and open “SIG.der” filefrom unpacked
archive.
5.Press “Search” button for “FSCS Certificate” and open
“00170001.der” file from unpacked archive.
6.Open “SWT Develop” tab, select “STORE_SIG_CERT” job
and press “=>” button. Do same for “CHECK_SIG_CERT”
job.
7.Press “Execute” and check for two “successful”
statuses.
8.Clean right window via select each line and press “<="
button.
9.Open "Parameter" tab and enter original car VIN.
10.Go back to "SWT Develop" tab and add "SET_VIN"
job.
11.Press "Execute" and check for "successful"
result.
12.Clean right window via select each line and press "<="
button.
13.Add "STORE_FSCS_CERT", "CHECK_FSCS_CERT",
"STORE_FSC", "CHECK_FSC" jobs. Press "Load
from" button for "Freischaltcode:" and select
"00170001.fsc" file from unpacked archive.
14.Press "Execute" and check for four "successful"
statuses.
15.Repeat same for "00190001.fsc", "001B0001.fsc",
"006F0001.fsc", "009B0001.fsc", "009C0001.fsc"
files and check results every time.
16.If requested, enter map code from 002800**.fsc file via iDrive menu or
via FS-Tool2 "STORE_FSC","CHECK_FSC" jobs.

How to import custom FSC codes in F series CIC

1.Start E-Sys, establish connection and perform CIC coding with correct car
FA and original VIN.
2.Open “FSC-Extended” page in “Expert Mode” tab, enter
“0x63” in “Diagnostic Address(hex):” and press “Identify”
button. After few seconds “HU_CIC” should appear in “Base
Variant:” field.
3.Select “WriteDataByIdentifierVIN”, press “>>”
button, enter real long car VIN. Press “Start” button and check Log
window for “ok” result.
4.Remove “WriteDataByIdentifierVIN” from left window via
selecting this line and press “<>” button and
open “SIG.der” file from unpacked archive.
7.Select “CheckSIGCert”, press “>>” button. Enter
“0x1B” into “Application number (hex/dec)” field and
“0x01” into “Upgrade index (hex/dec)”. Press
“Start” button and check for two “ok” results.
8.Remove “StoreSIGCert” and “CheckSIGCert” from right
window via select each line and press “<>” button and
open “001B0001.der” file from unpacked archive.
10.Select “CheckFSCCert”, press “>>” button.
Select “StoreFSC” and press “>>” button. Select
“CheckFSC” and press “>>” button.
11.Press “” button and select “00170001.fsc” file from
unpacked archive. “Application number (hex/dec)” and “Upgrade
index (hex/dec)” fields will be adjusted automatically according to
opened file.
12.Press “Start” button and check for four “ok”
results. Repeat same for “00190001.fsc”, “001B0001.fsc”,
“006F0001.fsc”, “009B0001.fsc”, “009C0001.fsc”
files and check results every time.
13.Clean right window via select each line and press “<>” and “Start” button. In Log window scroll up
and check “FSCSCertStatus” and “FSCStatus” for every code
to be “accepted”. Code “AppNr./UpgrIdx 40(0x28)” is short
map update code, which is generated from 0x1B code and it’s “Upgrade
Index” depending to used map data. It could have “rejected”
state, then you need to get new map update code.

CIC FSC Codes Application number List
0017 Voice control
0019 Navigation system Professional
001B Navigation system Professional
0028 European Map Code
006F Satellite Tuner
009C BMW Apps

Tags:
Was this article helpful?
Dislike 0
Views: 49
Previous: How to Use TOOL32 Delete FSC Certification File for BMW NBT Unit
Next: BMW FSC Code Cost