How to Coding for BMW Enhanced Bluetooth

You are here:
Estimated reading time: 1 min

This
post share a guide on how to perform BMW Coding for enhanced Bluetooth.

What You Need?
BMW E-sys  Coding Software
How To Use BMW E-sys Coding Software
BMW Coding/Flashing/Progrmming

BMW Coding Purpose:
Get a enhanced bluetooth

Step 1. Change FA from 6NH to 6NS:
Start E-sys, and connect to car by clicking icon at the top.
How to Coding for BMW Enhanced Bluetooth (1)

Select your car, and click connect. Select interface depending on interface
you will be using. If you
use ENET cable, select connection via VIN at the bottom.
How to Coding for BMW Enhanced Bluetooth (2)
Go to expert mode > coding. Click read under vehicle order to read FA
from car. Click edit.
How to Coding for BMW Enhanced Bluetooth (3)
Screen will automatically change to FA-editor. Right-click on FA, and
choose °∞calculate FP°±.
How to Coding for BMW Enhanced Bluetooth (4)
Once finished, vehicle profile is shown on right. Expand FAList on left, to
SALAPA-element.
How to Coding for BMW Enhanced Bluetooth (5)
Delete/add FA from the bottom left window, and click apply changes
icon.
How to Coding for BMW Enhanced Bluetooth (6)
New FA must be verified before it can be written to car. Right-click FA and
calculate FP again. If FA entered is wrong, error will be shown. For example,
°∞DDD°± is not correct FA and E-sys will display error message. After FP is
calculated, save the new FA.
How to Coding for BMW Enhanced Bluetooth (7)
Go to Expert mode > VCM. Load your saved FA file, right-click on FA and
calculate FP again.
How to Coding for BMW Enhanced Bluetooth (8)
Click VCM master tab, and click write FA FP. New FA will be written to the
car.
How to Coding for BMW Enhanced Bluetooth (9)
Click °∞read FA FP VIN°± button and check FA to make sure changes are saved
to the car.

Step 2. VO Code Head Unit and standalone Combox (CMB_MEDIA) if
present:
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM)
=> Right-Click on Head Unit ECU (e.g. HU_NBT, HU_CIC, HU_CHAMP, HU_ENTRY,
HU_ENTRYNAV, etc.) (the ECU itself not the underlying CAFD) => Select CODE
(Not Code FDL).

Repeat Step 2 above for and standalone Combox (CMB_MEDIA) if present.
Note: 6NS is used for NBT Head Unit. For cars with 6NH and ENTRY or CHAMP2
Head Units, use 6NK, or 6NL if car is equipped with BMW Assist.

Tags:
Was this article helpful?
Dislike 0
Views: 3
Previous: BMW E46 Type Pressure Monitoring Coding by INPA NCS Expert
Next: How to Coding for BMW E9x Check the BMW E9x Coding Sheet!