How to Do Adapt Service Oil and Inspection by VCDS for VW,SEAT,SKODA and AUDI

You are here:
Estimated reading time: < 1 min


This short post will show you guide on how to do adapt service oil and inspection by VCDS. More function of VCDS, please refer to VCDS CASES.

This function applies to VW,Seat,Skoda and Audi.

Procedure:

Connect VCDS to vehicle OBD port, running VCDS.

Click “Select” to select control module

Select “17-Instruments”

Select “Adaptation-10”

Input “Sia” for search, then select “IDE01153-SIA: maximum value of distance to service”

New value change to “10000”, click “Do It!”

Old value: 15000km

New value: 10000km

Replace?

Click “Yes”

Controller accepted the request. Will now read the channel again,

Click “Ok”

Select “IDE01154-SIA: maximum value of time to service”, new value change to “180”

Click “Do It!”

Function is ready.

Was this article helpful?
Dislike 0
Views: 11
Previous: ODIS vs. VCDS: Which One is Right for You?
Next: VCDS Software VAG COM Download And Install Guide[2022 Update]