How to enable BMW F-series Dazzle LEDs

You are here:
Estimated reading time: 1 min

How
to remove dazzle decoding and recode the ECUs to enable dazzle
LEDs?

BMW Coding for
Rolling window up with remote key-18
Note:Because the pictures in this guide are so large that you can’t see it
all in this site.

BMW
Coding
/Flashing/Progrmming

Tools you need to coding:

  • Laptop installed Esys BMW and
    EsysPlus
    Software
  • Coding Hardware cable BMW Enet cable or
    BMW Enet
    WiFi
  • Easy guide on how to enable dazzle LEDs

  • Step 1: Open ESYS, Make proper connection and open Expert Mode;
    Coding Tab.
  • Step 2: Read vehicle oder(FA),then save the file to your
    desktop,as we will make changes and then write those changes to the vehicle,
    so that they are permanent.
  • Step  3:Expand  the 
    FA  tree,  until 
    you  get  to 
    SALAPA element.
  • Step 4 :Right Click 
    on  SALAPA element  and 
    click  the  Edit 
    option.
  • Step 5:Make  your  desired 
    changes  in  the 
    box  below  the 
    FA tree  and  then 
    click  the  apply 
    changes button.
  • Step  6: Go  back 
    to  the  FA tree, 
    right click  on  FA, 
    then  select  calculate 
    FP
  • Step  7:Press  the 
    diskette  button  at 
    the  top  of 
    the  screen  to 
    save  your  changes 
    to  the  file 
    on  your
    desktop.
  • Step  8:Under  Expert 
    Coding,  select  VCM   
    Then  in  the 
    bottom  section,  press 
    the    button  and locate 
    the  file  you 
    saved  earlier  on 
    your  desktop
  • Step  9:Once  the 
    file  is  loaded, 
    Under  the  Vehicle 
    Order  section,  right click 
    FA  and  select 
    calculate FP.
  • Step  10:Once  FP 
    is  calculated    press 
    the  master  tab 
    at  the  bottom 
    of  the  screen, and 
    select  the Write  FA 
    &  FP  button   
    look  at  the 
    very  bottom  of 
    the  screen  for 
    confirmation  of  FA 
    &  FP  written
  • Step  11:Return  to 
    Expert  Mode;  Coding   
    then  press  Read 
    ECU  under  the 
    SVT  section
  • Step  12:Find  the 
    applicable  ECU(s)  that 
    need  to  be 
    VO_Coded,  and  right click 
    on  that  ECU 
    (as shown  below)  and 
    click 
    “Code”
  • Repeat  Step  12 
    for  any  remaining 
    ECUs  that  need 
    to  be  VO_Coded.The  most 
    popular  VO_Coding  changes 
    require  coding  to 
    the  following  ECUs
  •     Dazzle  LEDs:  
    FEM_BODY  &  KAFAS2 
    .  Or   FEM_BODY 
    &  FLA3
        Satellite  Radio 
    /  Enhanced  Bluetooth: 
    HU_NBT    or  HU_ENTRY 
    &  CMB_MEDIA

    Tags:
    Was this article helpful?
    Dislike 0
    Views: 11
    Previous: BMW INPA connect,How does the BMW ICOM NEXT A connect to BMW INPA?
    Next: How to coding BMW F10 DVD in Motion