How To Reset 2012 Reset Nissan Murano Cvt Fluid Count With Nissan Consult 3

You are here:
Estimated reading time: 1 min

Vehicle model: Nissan Murano Z51 3.5L CVT 2012Y

Purpose: reset CVT fluid “life” monitor

 

Device used:

You need a professional scan tool to reset the CVT transmission fluid count.  The normal code readers will not work.

Nissan Consult III, Nissan Consult III Plus, Launch x431 V and an Autel ms908p scanner, all of these will do the reset.

 

Procedure for using Nissan Consult III diagnostic tool:

If you are using a clone, Consult 3 plus is better choice.

This procedure is preferably carried out after changing the oil in the CVT .

 

Launch Starter in which we select Consult-III :

图片1

Press the Connect button :

图片2

Choose vehicle model Murano Z51 after 2010.v. and press the Select button :

图片3

Confirm the selection with the Confirm button :

图片4

Choose Diagnosis :

图片5

Select the type of Can- bus according to the configuration, in this case, the very first, and click the Next button :

图片6

Click on the tablet (top left):

图片7

Choose System Diagnosis :

图片8

Click on Transmission and OK :

图片9

Moving towards Work Support :

图片10

Click on Conform CVTF Deteriortn and Next :

图片11

At the moment, the fluid counter shows 7897

图片12

Click the Clear button and once again agree:

图片13

Counter reset:

图片14

Reset fluid count success with Nissan Consult 3 scanner.

图片15

Done.

Was this article helpful?
Dislike 0
Views: 3
Previous: How To Reprogram An Ecu With A Consult 3 Plus
Next: How to Reflash Nissan ECU Update Procedure with Consult III Plus