How To Reset Honda Accord 2010 Key With Autel Im608

You are here:
Estimated reading time: 1 min

Watch how to Reset Key on Honda Accord 2010 using Autel’s IM Tools

 

How to use Autel MaxiIM IM508/IM608 to reset key on a Honda Accord year 2010 step by step.

Select IMMO function->Auto VIN->Manual Selection->Accord->Blade Key->Immobilizer(Honda)

Turn the ignition off.

Identify it is 4th generation immobilizer.

Select Key->Reset Key


The registration or the clearance of the key will be recorded by this function.
At least one registered key is required to reset all key steps.

Insert a registered key and turn on the ignition.
Enter number of keys to be reset

Turn the ignition off.
Turn the ignition on.
Turn the ignition off within 20s.
Turn the ignition on using another key within 20s.


Turn the ignition off within 20s.
Turn the ignition on using the same key within 20s.

Turn the ignition off.
Turn the ignition on.
Check if the immobilizer indicator lamp goes out.
If yes, Turn the ignition off.
Turn the ignition on using a registered key.
The registration of the key is completed. Turn the ignition off.

Check all keys to ensure that all of them can start the engine.

Was this article helpful?
Dislike 0
Views: 5
Previous: Tips To Program 2020 2021 Subaru All Smart Keys Lost With Autel Im608 Im508
Next: How To Program Ford F 250 Used Pcm Module With Autel Im608 J2534