How to Retrofitting ECUs in CAN-BUS Gateway Control Unit to Porsche Boxster 987

You are here:
  • Help Center
  • How to Retrofitting ECUs in CAN-BUS Gateway Control Unit to Porsche Boxster 987
Estimated reading time: 1 min

This instruction shows you guidance on how to add or remove ECUs from vehicle ECU configuration in the CAN-BUS gateway control unit. The procedure allows retrofitting ECUs or removing ECUs that are no longer necessary. For more cases and technical support about Porsche’s full series, please refer to Porsche Solution.Preparation PoCOM For Porsche Diagnostic software Free Download How to Install PoCOM Software and DriverProcedures Connect the PoCOM interface to your computer. Connect the PoCOM interface to the OBD-II connector in the vehicle. You can use the picture gallery to find it, available from the main menu – OBD-II Connector Location button.How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-1Select Settings from the PoCOM main menu.How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-2Tick before “Development functions”, then “Save Changes”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-3Click “Select Control Unit”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-4Select “Porsche Boxster(2005-2012)[987], then “Go”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-5Click “Body”–>” CAN gateway”–>” Go”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-6Click “Configuration”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-7Scroll down and find “Parking assistant(CAN-BUS), Click it and editHow-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-8Change “Absent” to “Present”–” Continue”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-9Click “White configuration to ECU”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-10You are going to write new configuration data to the ECU. Always read the information carefully, then click “Yes”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-11Configuration was successfully written to the ECU. Click “OK”How-to-Retrofitting-ECUs-in-CAN-BUS-Gateway-Control-Unit-to-Porsche-Boxster-987-12

Tags:
Was this article helpful?
Dislike 0
Views: 2