How to Set up Tactrix Openport 2.0 for Nissan Consult 3 Plus?

You are here:
Estimated reading time: 1 min

We have pointed out how to configure J2534 passthru devices (Godiag j2534, 5054a, PCMTuner, SM2 pro) for Nissan Consult III Plus software.

How to Configure Nissan Consult III+ with Passthru Devices?

Here we show how to set up Tactrix Openport  2.0 with Nissan Consult 3 plus specifically.

Got the Openport 2.0 clone cable

Use Openport With Nissan Consult 3 Plus 1
Nissan Consult version 73 downloaded online

Need to configure diagnostic tool.ini to let the software see the adapter
Where is the folder in which you need to correct this file
C:CONSULT-III_plusSystemApplicationApplicationDataCommonSetting
There we edit/replace the DiagnosticTool.ini file with the one we made and everything will work.

Use Openport With Nissan Consult 3 Plus 2

At first it was like this

Use Openport With Nissan Consult 3 Plus 3

Then like this

Use Openport With Nissan Consult 3 Plus 4

Use Openport With Nissan Consult 3 Plus 5

Incorrect configuration

Install openport driver

Use Openport With Nissan Consult 3 Plus 6

To do this, download Link openport driver

The driver file is located in the folder C:Program Files (x86)OpenECUOpenPort 2.0drivers

After install driver and configure DiagnosticTool.ini

it works fine with openport.

Use Openport With Nissan Consult 3 Plus 8

Use Openport With Nissan Consult 3 Plus 9

Use Openport With Nissan Consult 3 Plus 10

Was this article helpful?
Dislike 0
Views: 45
Previous: Alientech KESS3 Update Iveco S-Way MD1CE101 by OBD 
Next: Vgate iCarPro & AlfaOBD Review on Jeep