How to Use EasyConnect to Configure Port for ISTA

You are here:
Estimated reading time: < 1 min

Procedures:
If your BMW Enet cable
configuration as below

  • Type:STD
  • Mode:OBD
  • If you use ICOM interface,please configure as below:

  • Type:Remote
  • IP address set from iTool Radar,please refer to:How to Use iTool Radar
    Connect Rheingold ISTA BMW Software
    to ICOM

  • Mode:OPPS BASE
  • After configuration done,click “Check”
    button
  • If it display voltage value like below picture,it mean port configuration
    successfully.

    Notice
    Mode COPPS_MOST_ASYNC:
    This option is applied for CIC,CCCmedia system unit programming via
    fibre-optical

    Tags:
    Was this article helpful?
    Dislike 0
    Views: 5
    Previous: How to Configure Expert Mode for BMW Rheingold ISTA-D/ISTA-P
    Next: How to Use BMW Rheingold ISTA to Do Programming and Coding