How to Write VIN in Your CIC and MEDIA by Tool32

You are here:
Estimated reading time: 1 min

I°Øm sharing with you how to write VIN in your CIC and MEDIA
using Tool32, but same process can be used to change the VIN# of any module ,
the only difference is the PRG file related to the module you want to access
.The hardest and mistery part to get Internet/BMW live working is how to
write the suitable VIN on the system.
Note:This article is just for educational purpose,I am not responsible for
any result,please try at your own risk.

Please read the whole procedure before start, you must understand this
before you continue. Look for a suitable VIN, this is in your hands°≠ you
will have to write this VIN in four different parts, Ill teach you how
below°≠

Procedures fo writing VIN into CICI and MEDIA by Tool32:

Start Tool32.exe
Press F3 and load cmediar.prg, your PC must be connected via Dcan cable and
the link must be working fine.
If you succesfully connect to your car you will get a screen filled with
info, look for these (2) two options°≠
How to Write VIN in Your CIC and MEDIA by Tool32-1

1.1 Click on c_fg_schreiben
1.2 Ok now lets write your VIN here°≠
How to Write VIN in Your CIC and MEDIA by Tool32-2
1.3 Then just click on°≠. (read below)**
How to Write VIN in Your CIC and MEDIA by Tool32-3

**(here you will actually write the new VIN), this works instantly not like
NCSexpert which takes time, I wrote the VIN with its check number (17th
digit) that you can get from the FA functions from NCSExpert. I can explain
you this separately.

Now lets write the VIN to the second place, click on c_fg_auftrag and
repeat 1.2 and 1.3.

Now we will change the ECU, press F3 and look for CICR.PRG and repeat the
above same steps for c_fg_schreiben and c_fg_auftrag.
If your VIN is OK you will get your Internet Working, of course Im assuming
that you already have the Internet and BMW live menues available and your
tethering working. If you don°Øt have these menues try this on CIC°≠

ONLINE_BROWSER_C0D
beide_aktiv
Good luck!!!

Was this article helpful?
Dislike 0
Views: 2
Previous: E-sys How to setup psdzdata
Next: WinKFP Expert Mode Programming Configuration