NCS Expert BMW Coding for Window & Sunroof Remote Control

You are here:
Estimated reading time: 2 min

Also retrofitted the factory bluetooth & usb kit with NCS,
also by changing the VO and defaulting the RAD2. Works perfect.

BMW Coding/Flashing/Progrmming
NCS Expert BMW Coding Software Download
NCS Expert Program and Coding Guide
How to Update BMW NCS Expert Software

NCS Expert Change BMW Vehicle Order (VO)

The nice thing about modifying the trace files in NCS is that you forget
what you have changed and something goes wrong, you can °∞default°± the
module back to factory specs (and the default is based on your Vehicle Order
[VO] which defines the region of your vehicle [like how Canada cannot turn
off DRL from the BC on the stalk] and the modules installed in the
car).

The following are the changes I have made.

Comfort closing via the remote fob (also can be done via the metal key in
the door cylinder). In the CAS module

Code:
KOMFORTSCHLIESSUNG_FB
    aktiv

Seat belt chime is in the Airbag ABG/MRS module. Driver and passenger is
set separately. CC_GURT stops the seat belt message at startup.

Code:
CC_GURTWARNUNG
         nicht_aktiv

SBR_BEIFAHRER
         nicht_aktiv
SBR_FAHRER
         nicht_aktiv

And now the two-touch open and two-touch close sunroof is working, in the
SHD module

Code:
SCHIEBEHEBEDACH_TIPP_AUF
        aktiv
SCHIEBEHEBEDACH_TIPP_HEB
        aktiv
SCHIEBEHEBEDACH_TIPP_SENK
        aktiv
SCHIEBEHEBEDACH_TIPP_ZU
        aktiv
No A/C engagement when pressing the AUTO button! In the IHKA module

Code:
KLIMA_MIT_AUTO
        nicht_aktiv

Digital speed always shows in the top window (so I can see instant miles
per gallon and the speed at the same time, word has it 2011 models this is
default) in the KOMBI module
Code:
DIG_SPEED_PERMANENT
        aktiv

Enable fog lights with the high beams. In the FRM module
Code:
FL_UND_NSW_NICHT_GLEICHZ
        nicht_aktiv

Double-Blink Hazard flashers. In the FRM module
Code:
DOPPELBLINKIMPULS_WARNBLK
        aktiv

Here are some additional changes that can be made:

Auto unlock doors when you remove the key. Only unlocks when the autolock
is programed in the BoardComputer! In the CAS module
Code:
ER_KEYOUT_AUTOVR
        aktiv

Added the code to enable the alarm light on the top of the tach. In the
SPEG and KOMBI change the following:
Code:
DWA_VERBAUT
    aktiv

Nav users can remove the legal warning upon startup. CAPPL Module
Code:
LEGAL_DISCL
         nicht_aktiv

To change your DRL mode to using just the front City Lights (the top bulb
in the fog housing) and no other lights change the following two settings in
the FRM module:

Code:
VERHALTEN_DRL_TFL
              drl_s
DRL_TFL_MIT_SML
              aktiv
To turn off bulb checks you will need to disable both warm and cold testing
of each of the bulbs you modify and the appropriate check control message. I
highly recommend running the NCS DUMMY translations to find the settings you
need, there are way too many to post here. All of the lighting is in the FRM
module. The abbreviations for most of the lights are in the translations. In
the Cooper we do have dual dual-function rear bulbs in the tailights and they
are controlled independently (if you turn off your car and turn on your
parking lights you will see only one of the bulbs lit in the rear). Those are
RL_BL_1 and RL_BL_2. KZL is license plate light, NSW rear fog, NSL front
fog.
CC_MELDUNG_BLK_V is an example of the °∞Check Control°± in your tach
display for warning.

I wanted to get the BFD (brake force display) to work by flashing the rear
fog light or flashers under hard braking, I never could get it to work. Be
advised we don°Øt have BFD lights like many BMW assemblies have. But it looks
like BFD_2 is what we would use.

Was this article helpful?
Dislike 0
Views: 2
Previous: NCS Expert Reset & Code BMW 335i Adaptive Light Control Modules
Next: How To:BMW Mini R56 Coding Guide