Nissan CVT Transmission Programming with Consult III Plus

You are here:
Estimated reading time: 1 min

Nissan CVT Transmission Programming with Consult III Plus

In this document, we discuss how to program a replacement of the new Nissan CVT Transmission with Nissan Consult III VCI Plus software. For the new replacement transmission you received, there will be a CD included, that’s the CD we are going to use in the programming stage. It has the IP Characteristics data file.TCM performs accurate gear ratio control by retrieving and storing data (characteristic value). TCM records the degradation level calculated from the vehicle driving status; it is necessary to erase the degradation level data recorded by the TCM.This function is used when replacing AT/CVT. Before performing the writing operation, check if the serial number matches the one described on AT/CVT assembly. The serial number is stamped on the AT/CVT assembly or described on the QR code sticker applied on the AT/CVT assemblyNissan built many vehicles with Continuously Variable Transmission technology, CVT Transmission such as Cube, Murano, Altima, Altima coupe, Maxima, Rogue, Pathfinder, Sentra and Versa.For this educational tutorial, we have in our programming bay a 2013 Nissan Altima.Perform the following after the transmission assembly is replaced:

  1. Open CONSULT and select Diagnosis (One System)
  2. Turn the ignition switch ON and insert the TCM data CD into CONSULT.
  3. Select “Work Support” in “TRANSMISSION,” on Consult, and then select “WRITE IP CHARA – REPLACEMENT AT/CVT.”
  4. Select the IP Characteristics data file, insert the CD that came with the new Transmission to your CONSULT computer and select the file.5. Make sure the serial number displayed on CONSULT matches with the serial number written in the memo above.
  5. Click next and follow the Consult III Plus screen guide. Once completed screen will show “Data writing completed successfully”.
  6. IP Charactrics data on the entered serial number will be written into TCM, click on Write

That completes the process of program replacement of the new CVT Transmission.I have seen new transmission comes without a CD and they are already programmed.End of IP CHAR – REPLACEMENT AT/CVT

Tags:
Was this article helpful?
Dislike 0
Views: 14
Previous: How to indentify and calculate Nissan Pin Code?
Next: Free Download Godiag J2534 Driver 2.3 Supports Renault/Nissan