Range Rover Longitudinal Acceleration Sensor Calibration by Launch x431 

You are here:
Estimated reading time: < 1 min

Range Rover Longitudinal Acceleration Sensor Calibration by Launch X431

After replace parking control module, cars need to do this function.

2016 Range Rover,VIN:SALWA2VF7GA57****;

1).Use auto search and make sure all information, press “Yes”;

2).Choose “Parking brake control module”;

3).Enter parking brake control module special function,choose “Longitudinal accelerometer
calibration”.

4).Press “Yes” to start this function;

5).Switch on ignition press “Yes”;

6).Parking brake your car in a flat ground, press “Yes”;

7).Press “Yes” to start calibration;

8).Longitudinal acceleration sensor calibration completed, press “Yes”;

9).Turn off the ignition press “Yes”;

10).Switch on the ignition;

11).Next will clear all DTC, press “Yes”;

12).Clear DTC;

13).Turn off the ignition press “Yes”;

14).Switch on ignition, press “Yes”;

15).Program finished, press “Yes”;

Was this article helpful?
Dislike 0
Views: 3
Previous: The Differences between Request Fault Code and Persistent Fault Code with X431 
Next: Nissan Teana 2015 Key Programming by Launch X431