Use Xtool X100 Pad3 to adds key for Dodge Charger in 3 minutes

You are here:
Estimated reading time: 1 min
In this article

Xtool X100 Pad3 can program a new key for Chrysler Dodge Charger successfully.

How to program?
Plug X100 Pad3 connector into OBD2 port, press
Diagnosis >> Dodge >> Agree >> Proximity/Fobik(RFH) >> Charger 11- >> Read security code >> OK

Go back to press
Erase smart keys >> Input security code >> OK
Erase success.
Go to “Add smart key”.
Emergency light opens and turns the ignition off, press “OK”.
Put the key near to center console, then press UNLOCK once in the 30s.
Press “OK”.
Program completed.
Press “OK” to finish.
Let’s test the key, in the end, it does work well.

Using Xtool X100 Pad3 to program a key for Dodge Charger is quite fast and easy, it takes me only 3 minutes to be done.

Was this article helpful?
Dislike 0
Views: 4
Previous: Use a Laptop As an Automotive Scan Tool Instruction
Next: Troubleshooting and Testing about Nexiq USB Link 2 Review