Volvo Link Hardware Failure – How to fix instantly?

You are here:
Estimated reading time: 4 min

What is Volvo Link Hardware Failure?

Volvo Link is an advanced telematics system that is used in many modern Volvo vehicles to provide a wide range of services, including remote diagnostics, vehicle tracking, and driver behavior analysis. While this technology has revolutionized the automotive industry and has made driving safer and more efficient, it is not immune to hardware failure.

In fact, Volvo Link hardware failure is a common issue that many drivers and technicians encounter, and if left unaddressed, it can lead to serious consequences such as vehicle breakdowns, reduced performance, and compromised safety.

In this blog post, we will explore the causes and symptoms of Volvo Link hardware failure, and provide step-by-step instructions on how to diagnose and fix this issue.

Whether you’re a Volvo driver, technician, or simply interested in automotive technology and car diagnostic tools, this guide will provide valuable insights on how to address this common problem and keep your Volvo Link system running smoothly.

Symptoms of Volvo Link Hardware Failure

When a Volvo Link hardware failure occurs, there are several symptoms that can manifest themselves in different ways. Here are some of the most common symptoms of Volvo Link hardware failure:

  1. Connection Errors: One of the most obvious symptoms of Volvo Link hardware failure is when the system cannot establish a stable connection to the network. This could be due to a faulty hardware component, damaged wiring, or software glitches. Drivers may experience frequent disconnections, slow response times, or error messages when trying to use the system.
  2. Malfunctioning Sensors: Volvo Link relies on a range of sensors to monitor various aspects of the vehicle’s performance, including engine temperature, fuel consumption, and tire pressure. When the hardware associated with these sensors fails, drivers may notice erratic behavior or false readings, which can be confusing or even dangerous. For example, a faulty tire pressure sensor could cause the driver to ignore a genuine warning, leading to a flat tire or worse.
  3. System Crashes: If the hardware components responsible for running the Volvo Link software fail, the system may crash, resulting in a blank screen or frozen display. This can be frustrating for drivers who rely on the system for navigation, entertainment, or other features. In some cases, a system crash could also lead to data loss, which can be costly or difficult to recover.

By being aware of these symptoms, drivers can quickly identify when a hardware failure occurs and take the necessary steps to address it.

Check Volvo diagnostic software for trucks and buses here

How to fix Volvo Link Hardware Failure

If you are experiencing the “Volvo Link Hardware Failure Use Paper Logbook” error on your Volvo dashboard, there are a few potential solutions you can try:

Solution 1: Use Devtool to Make Parameter “BID” Programmable in Instrument Cluster

  1. Obtain Devtool software and connect it to your Volvo vehicle using an OBDII cable.
  2. Open the Devtool software and select “Instrument Cluster” from the programming options.
  3. Find the “BID” parameter and select it. It may or may not have the name “Volvo Link Fault Detection”.
  4. Change the value of the parameter from 171 to 0.
  5. Save the changes and exit the programming software.

This solution has worked for some Volvo drivers who have experienced the “Volvo Link Hardware Failure” error.

New: Volvo Vocom Interface : 50% Discount limited time

vocom interface for volvo trucks
vocom interface for volvo trucks

Solution 2: Unplug the Volvo Link

diagram that shows where Volvo Link is located in a car and how to unplug it to fix Volvo Link Hardware Failure issue.
  1. Locate the Volvo Link module in your vehicle. It is usually located near the dashboard or behind the glove box.
  2. Disconnect the module from the vehicle by unplugging it.
  3. Restart the vehicle and check to see if the error message has cleared.

This solution may also work for some drivers who have experienced Volvo Link hardware failure. Keep in mind that unplugging the module will disable the functionality of the system, so this solution may not be appropriate for all drivers.

It is important to note that these solutions may not work for every instance of Volvo Link hardware failure. If you have tried these solutions and are still experiencing issues, it may be necessary to seek professional assistance from a certified Volvo technician.

FAQ

Q: What is Volvo Link hardware failure?
A: Volvo Link hardware failure is a common issue that occurs when the hardware components of the Volvo Link telematics system fail, leading to connection errors, malfunctioning sensors, and system crashes.

Q: What are the symptoms of Volvo Link hardware failure?
A: Symptoms of Volvo Link hardware failure include connection errors, malfunctioning sensors, and system crashes. Drivers may experience frequent disconnections, false readings, and blank or frozen displays.

Q: How can I fix Volvo Link hardware failure?
A: There are a few potential solutions to fix Volvo Link hardware failure, including using Devtool to make the “BID” parameter programmable in the instrument cluster, and unplugging the Volvo Link module. Keep in mind that these solutions may not work for every instance of Volvo Link hardware failure, and seeking professional assistance from a certified Volvo technician may be necessary.

Q: Can I still drive my Volvo with Volvo Link hardware failure?
A: While it is possible to drive the vehicle with Volvo Link hardware failure, it is important to note that the system may not function properly and may compromise safety. Drivers should seek to address the issue as soon as possible to avoid potential breakdowns or reduced performance.

Q: Can I fix Volvo Link hardware failure myself?
A: While some drivers may be able to fix Volvo Link hardware failure using the suggested solutions, it is important to have the necessary knowledge and tools to do so. In some cases, seeking professional assistance from a certified Volvo technician may be the best course of action.

Conclusion

In conclusion, Volvo Link is a useful technology that offers numerous benefits to Volvo drivers. However, like any complex system, it is prone to hardware failure, which can cause a range of problems. Fortunately, there are solutions available that can help drivers address Volvo Link hardware failure and keep their systems running smoothly.

By being aware of the symptoms of this issue and following the steps outlined in this guide, drivers can minimize the impact of hardware failure and enjoy the full benefits of Volvo Link technology. Remember, if you have tried these solutions and are still experiencing issues, it is important to seek professional assistance from a certified Volvo technician.

Was this article helpful?
Dislike 0
Views: 7
Previous: AHI Module Issues: Understanding DTC P24F700
Next: How to Install Volvo VIDA 2014D Software on Win 7