What is the XENTRY Diagnostic Software  

You are here:
Estimated reading time: 3 min

The official Mercedes-Benz dealer software, Xentry DAS (Diagnostic Assistance System), is a comprehensive diagnostic system for Mercedes-Benz automobile issues. The software allows users to configure, reprogram, introduce new components, execute guided tests, read or delete fault codes, and apply many other functionalities to a Mercedes-Benz vehicle.

Hardware Requirements
Hardware needed for Xentry DAS includes the C3 Multiplexer Star or C4 SD Connect. The C4 SD Connect has taken the place of the older C3 multiplexer. You will require a laptop with a serial connection RS232 to connect the Multiplexer and run the Xentry software. The Xentry Diagnostic scanner is widely available online in unauthorized form, so take caution and avoid such modified versions. By getting in touch with authorized Mercedes-Benz dealers or representatives in the United States, you can acquire this system.

What is Developer Mode Extension for DAS?
Deep setup and programming of the control units are possible with the DAS developer extension for Mercedes-Benz automobiles. Usually, the factory version of the scanner has this option activated. It was intended for use in the development and testing of the onboard electronic systems. The user will be able to modify the vehicle’s setup. You may modify many various things, such as the ECU, the programming to utilize a new engine type, the speed restriction or torque settings, and much more. It might be risky to use Developer Mode if you are unsure of what you are doing.

It goes without saying that Mercedes-Benz has consistently been at the forefront of creating practical and user-friendly diagnostic instruments and technology. The Mercedes SDS (Star Diagnostic System), which is currently in its most recent iteration known as XENTRY, continues to see improvements and additions to its hardware, software, and protocols, making it an especially potent and practical tool for independent repair shops to use when maintaining Mercedes-Benz vehicles.

Beginning with the launch of the new 204-series in 2008, XENTRY is particularly suited for diagnosing Mercedes-Benz automobiles, although it also performs a wide range of other tasks. Additionally, it has DAS capabilities, which come standard on cars made before the 204 series. Technically, Star Diagnosis basic2, Star Diagnosis compact3, Star Diagnosis compact3w, and Star Diagnosis 4 are all compatible with XENTRY; however, none of them are any longer in production or maintained.

It is advisable to only use XENTRY since this is the system that Mercedes-Benz provides to vehicle repair shops and it covers each and every system in a Mercedes-Benz. There are three essential functionalities offered by the XENTRY/SDS system’s structure, these are:

1. Comprehensive Vehicle Identification
Beyond the VIN, XENTRY will assist you in finding the build model (“Baumeister”) number for the car, allowing you to examine and record all of the vehicle’s characteristics, such as extensive chassis information and extras as installed. This will make it easier to order components from the parts department of your nearby Mercedes-Benz dealer and will be useful for figuring out the requirements and criteria for a certain car.

2. Diagnosis
You will receive thorough diagnostic instructions, advice, and warnings from XENTRY. It will aid in exposing both already known and undiscovered issues in your vehicle. Additionally, it will make it easier to run quality control tests after repairs to ensure that they were done correctly and effectively.

3. Programming and Software Updates
You can program or re-program existing control units using XENTRY as needed, following servicing, or a battery power disconnect. It’s essential to keep in mind that the memory held in a control unit that will be updated will probably be lost, so it’s best to record codes and other information during a Quick Test before reflashing.

Additionally, you may install software upgrades to keep cars current with the most recent improvements and program new replacement parts as needed. The XENTRY Connect is essentially a task-specific PC that runs the software and is based on the Windows 7 operating system. It contains a network/LAN connector to utilize during initial setup, two cooling fans, two USB ports, an input for the power supply, and an illuminated display with function buttons that indicates the operating and function status. A touch screen with an operational pen, function buttons and a speaker are all included in the XENTRY display unit.

XENTRY Connect has input ports for many different types of connections, including a serial port, a LAN port for network cabling, a power supply input port, three USB ports, headphone and microphone jacks, a multi-card reader, and a Wi-Fi on/off switch. The main innovation is that all programs are set up and run on the multiplexer, XENTRY Connect, directly. It converses with the automobile, deciphers the data from the car, and provides a broad range of DAS/XENTRY diagnoses all at once.

XENTRY Installation Process

The procedures below must be followed in order to download and install the Mercedes-Benz Xentry diagnostic software:
Step 1: Your firewall and antivirus software must be disabled.
Step 2: Start XENTRY by going to the Xentry folder.
* Before installing the Xentry OpenShell program, enable VCRedist x86/x64.
* Click Mount to run after selecting XDOS 22.6.3. Installing initially
* Allow the installation to complete independently as it may take many hours.
Note: Every application picks language after running as an administrator
Step 3: Your machine will display a reboot confirmation after processing the XENTRY data.
Step 4: You need to make sure the anti-virus is no longer activated after rebooting in order to disable it.
Step 5: Disable the background-running PDFs for Xentry.
Open Task Manager by performing a right-click on the Windows toolbar.
Step 6: Install the missing file into the CLO drive once Xentry is cracked.
Step 7: Keep the activation key safe.
Step 8: Change LAN ID
Step 9: Use and check the Xentry program.

Your Xentry is prepared to connect and help your work once all the procedures have been followed. The car models have had their data updated, data errors fixed, and reading issues fixed with this most recent version.

Was this article helpful?
Dislike 0
Views: 19
Previous: What is the best diagnostic tool for Mercedes